Model: STS 5000 & TD 5000 | Order No: PII10175 & PII11175
Fully automatic Test System designed to perform primary tests requested in substations commissioning, like current, voltage and power transformers. It is equipped with outputs for High Current, and High and Low Voltage measurements. The TD 5000 enables to test the Dissipation Factor, Capacitance and Power Factor.
The STS 5000 is equipped with AC and DC high current outputs, AC and DC high and low voltage outputs, and current and voltage meters and allows to perform accurate tests on CTs, VTs, PTs and ground grid.
The high-voltage generator TD 5000 performs the measurement of the Tan Delta, of the dissipation factor and of the capacitance. The measurement is performed by the module. The measurement circuitry incorporates a reference high voltage capacitor, rated 200pF, with a tan delta better than 0.005%, plus a reference resistor bridge, with accuracy better than 0.01%, and thermal drift less than 1 ppM/°C.
|High AC Current Output Range||200, 300, 400, 600 or 800A|
|High DC Current Output Range||100, 200, 300 or 400A|
|High AC Voltage Output Range||500, 1000 or 2000V|
|Low AC Current Output Range||3 or 6A AC|
|Low DC Current Output Range||6A DC|
|Low AC Voltage Output Range||70 or 140V AC|
|AC Output Frequency Range||15 to 500Hz|
|Display||Backlight LCD, 132 x 99mm|
|Dimensions/Weight||450 x 400 x 230mm / 29kg|
|Dissipation Factor Range||0 to 10%, 0 to 100% or >100%|
|Dissipation Factor Resolution||5 Digits|
|Capacitance Range||1pF to 3µF|
|Capacitance Accuracy||±0.03% of the value ±0.1pF|
|Power Factor Range||0 to 10% or 0 to 100%|
|Impedance Range||1kΩ to 1400MΩ|
|Power Measurement Range||10kW, 100kW, 1MW|
|Dimensions/Weight||440 x 345 x 210mm / 25kg|
Click on a category to view a selection of compatible accessories with the ISA STS 5000 Multifunction Substation Test System with Current and Voltage Outputs & TD 5000 Capacitance and Tan Delta Diagnostic System.