Non-contact Clamp-on system provides you easy and safe installations of the clamp sensor in the existing facilities without any errors.
Non-contact Clamp-on system provides you easy and safe installations of the clamp sensor in the existing facilities without any errors.
| Conductor Size | Ø24 |
| Rated Current | 30A AC |
| Output Voltage | 1500mV AC/30A (AC 50mV/A) |
| Accuracy | 0 to 15A, ±1.0% rdg±0.1mV (50/60Hz) ±2.0% rdg ±0.2mV (40Hz to 1kHz) 15 to 30A, ±5.0% rdg (50/60Hz) ±10.0% rdg (45Hz to 1kHz) |
| Withstand Voltage | 3540V AC for 5 seconds |
| Cable Length | Approx 2m |
| Output Connector | MINI DIN 6pin |
| Operating Temperature Ranges | 0 to 50°C, less than 85% RH (without condensation) |
| Output Impedance | Approx. 90Ω |
| Applicable Standards | IEC 61010-1:2001, IEC 61010-2-032:2002, CAT.III 300V pollution degree 2 |
| Dimensions | 100 x 60 x 26mm |
| Weight | Approx. 150g |
