The current switch with fixed trip point is ideal for direct-drive units, unit vents, fan coil units, exhaust fans and other fixed loads.
The current switch with fixed trip point is ideal for direct-drive units, unit vents, fan coil units, exhaust fans and other fixed loads.
The current switch with fixed trip point is ideal for direct-drive units, unit vents, fan coil units, exhaust fans and other fixed loads.
Features
Applications
| Sensor Power | N.O models: induced from monitored current; H800NC: 5 to 30 VDC, permanently connected |
| Insulation Class | 600 VAC RMS (UL), 300 VAC RMS (CE*) |
| Frequency Range | 50/60 Hz, on/off status for Variable Frequency Drive (VFD) outputs at 12 to 115 Hz (a) |
| Temperature Range | H800NC, H300, H900: 5 to 140°F (-15 to 60°C) |
| Humidity Range | 10 to 90% RH non-condensing |
| Terminal Block Wire Size | 24 to 14 AWG (0.2 to 2.1 mm²) |
| Terminal Block Torque | 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m) |
| Warranty | 5 years limited |
| Agency Approvals | UL 508 open device listing; CE: EN61010-1, CAT III, Pollution Degree 2, basic insulation |
| Sensor Power | N.O models: induced from monitored current; H800NC: 5 to 30 VDC, permanently connected |
| Insulation Class | 600 VAC RMS (UL), 300 VAC RMS (CE*) |
| Frequency Range | 50/60 Hz, on/off status for Variable Frequency Drive (VFD) outputs at 12 to 115 Hz (a) |
| Temperature Range | H800NC, H300, H900: 5 to 140°F (-15 to 60°C) |
| Humidity Range | 10 to 90% RH non-condensing |
| Terminal Block Wire Size | 24 to 14 AWG (0.2 to 2.1 mm²) |
| Terminal Block Torque | 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m) |
| Warranty | 5 years limited |
| Agency Approvals | UL 508 open device listing; CE: EN61010-1, CAT III, Pollution Degree 2, basic insulation |
